Wi-Fi and amateur radio

In the U.S., Canada, Australia and Europe, a portion of the 2.4 GHz Wi-Fi radio spectrum is also allocated to amateur radio users. In the U.S., FCC Part 15 rules govern non-licensed operators (i.e. most Wi-Fi equipment users). Under Part 15 rules, non-licensed users must "accept" (i.e. endure) interference from licensed users and not cause harmful interference to licensed users. Amateur radio operators are licensed users, and retain what the FCC terms "primary status" on the band, under a distinct set of rules (Part 97). Under Part 97, licensed amateur operators may construct their own equipment, use very high-gain antennas, and boost output power to 100 watts on frequencies covered by Wi-Fi channels 2-6.
However, Part 97 rules mandate using only the minimum power necessary for communications, forbid obscuring the data, and require station identification every 10 minutes. Therefore, output power control is required to meet regulations, and the transmission of any encrypted data (for example https) is questionable.
In practice, microwave power amplifiers are expensive. On the other hand, the short wavelength at 2.4 GHz allows for simple construction of very high gain directional antennas. Although Part 15 rules forbid any modification of commercially constructed systems, amateur radio operators may modify commercial systems for optimized construction of long links, for example. Using only 200 mW link radios and high gain directional antennas, a very narrow beam may be used to construct reliable links with minimal radio frequency interference to other users.